1. Avoid loss of electricity storage. The state of deficient power means that the battery is not charged in time, and it is prone to sulphation. The lead sulfate crystals are attached to the plate and block the ion channel, resulting in insufficient charging and a decrease in battery capacity. The longer the idle state is idle, the more serious the battery damage. When the battery is not in use, it should be recharged once a month, which will extend the battery life.

2, to be regularly inspected, in the course of use, if the mileage of the electric scooter suddenly drops by more than ten kilometers in a short period of time, it is likely that at least one battery in the battery group has a broken grid, the plate is softened, and the pole Short circuit phenomenon such as falling off of active material of the board. At this time, you should go to the professional battery repair organization for inspection, repair or matching.

3, do not discharge large current, electric scooter in the start, manned, uphill, it is best to use the ankle to help, try to avoid instantaneous large current discharge. Large current discharges tend to cause lead sulfate to crystallize, thereby damaging the physical properties of the battery plates.

4, master the charging time, under normal circumstances, the battery is charged at night, the average charging time is about 8 hours. If it is a shallow discharge (the mileage after charging is very short), the battery will soon be full. If it continues to charge, it will overcharge, causing the battery to lose water and heat, reducing battery life. Therefore, when the battery is discharged at a depth of 60%-70%, the charge is optimal. In actual use, it can be converted into a riding mileage, and the necessary charging is performed according to the actual situation to avoid harmful charging.

5, to prevent high temperature exposure, electric vehicles are strictly prohibited to expose to the sun. If the temperature is too high, the internal pressure of the battery will increase and the battery pressure limiting valve will be forced to open automatically. The direct consequence is to increase the water loss of the battery. The excessive water loss of the battery will inevitably lead to a decrease in battery activity, accelerate the softening of the plate, and charge the case. Fatal damage such as body heat, shell drumming, deformation, etc.